When you first start MakeGate you will have to use the arrow keys to move the cursor down to UUCP and then hit [ENTER], this will bring up this screen. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ MakeGate Copyright (C) 1993,94 Mustang Software, Inc. Version 4.01 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ UUCP Configuration ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º UUCP Administrator : James Marous º º Email conference : 100 Internet private E-Mail º º Bounce messages : Y º º GMT offset Hours: -4 Minutes: 0 º º Organization : James' BBS, Springfield, OH º º Local domain name : jamesbbs.com º º Local site name : jamesbbs º º News request name : NEWS º º Secondary domain name : º ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶ º F2 Pick F3 Hosts F4 Newsgroups F10 Done º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ UUCP Administrator -> Your name as in MakeWild, messages sent to your system addressed as Root, SysOp or PostMaster will go to this name. You will probably want this to be you. Email Conference -> Your Wildcat conference number for E-mail. There should only be one conference for E-Mail and it should be configured as in MAKEWILD.TXT. Bounce Messages -> If a message arrives and the address can't be translated, wcGate will send a message back to the sender telling them of the problem if this is set to yes. Setting it to No may speed up mail processing a little, but at the cost of not informing the sender if there is a problem. GMT OffSet -> This is the number of hours and minutes your location is offset from Greenwich Mean Time. You will probably need to consult an atlas or ask someone at your library what this is. This time is -4 hours on the East coast and -7 hours on the West coast, but check your local offset just to be sure. Organization -> This is a line that will be displayed in the message header of every outgoing message from your system. You will probably want it to be your BBS name and maybe your location if there is enough room. Local Domain Name -> This is your fully qualified domain name that you have registered. It will take some time after you have filled out the forms for this to become active, but your UUCP host should give you a temporary one to use until that time. My temporary address was jamesbbs.uucp until my domain name became active. Local Site Name -> Usually the first part of your domain name before the period. Be sure to ask your UUCP host exactly what your site name is. News Request Name -> Used if you are providing mail to downlink nodes. You shouldn't need to mess with this yet. Secondary Domain Name -> A new feature of wcGate 4.01 which allows you to specify a second domain name, you may want to use this for your temporary domain name. Press [F10] to save this and then move on. ----------- Now Press [F4] to enter your Newsgroups and it will bring up this screen. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ MakeGate Copyright (C) 1993,94 Mustang Software, Inc. Version 4.01 ³ ÀÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Edit Newsgroups ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͻ٠º Conf Newsgroup º º ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ º º 101 Internet Wildcat ALT.BBS.WILDCAT º 103 Internet Animation REC.ARTS.ANIME º 102 Internet BBS & Internet ALT.BBS.INTERNET º 104 Internet Animation Story REC.ARTS.ANIME.STORIES º 105 Internet Ohio News OH.NEWS º 106 Internet Cinci Bengals ALT.SPORTS.FOOTBALL.PRO.CINCI-BENGALS º 107 Internet MS Windows Apps COMP.OS.MS-WINDOWS.APPS º 108 Internet MS Windows Utils COMP.OS.MS-WINDOWS.APPS.UTILITIES º 109 Internet Science BME SCI.ENGR.BIOMED º 110 Internet Startrek Fandom REC.ARTS.STARTREK.FANDOM º 111 Internet MST 3000 REC.ARTS.TV.MST3K º 112 Internet Star Trek Curr REC.ARTS.STARTREK.CURRENT º 113 Internet Football REC.SPORT.FOOTBALL.PRO º 114 Internet Baseball REC.SPORT.BASEBALL º 115 Internet Basketball REC.SPORT.BASKETBALL.PRO ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶ º INS Add F4 Find F5 Next DEL Delete F10 Done º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Now press [INSERT] to add a new newsgroup. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ MakeGate Copyright (C) 1993,94 Mustang Software, Inc. Version 4.01 ³ ÀÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Edit Newsgroups ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͻ٠º Conf Newsgroup º º ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ º º 101 Internet Wildcat ALT.BBS.WILDCAT º 103 Internet Animation REC.ARTS.ANIME º ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Edit News Groups ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º Newsgroup name : ALT.BBS.WILDCAT º º º Wildcat! conference: 101 Internet Wildcat º º º Distribution : world º º º Group type : Normal º º º Mailing list name : º º º Reply to address : º º ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶ º º F2 Pick F10 Done º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ º 113 Internet Football REC.SPORT.FOOTBALL.PRO º 114 Internet Baseball REC.SPORT.BASEBALL º 115 Internet Basketball REC.SPORT.BASKETBALL.PRO ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶ º INS Add F4 Find F5 Next DEL Delete F10 Done º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ NewsGroup Name -> The full name of the newsgroup. You will have to ask your host for a list of all newsgroups available to you and you will get this name from that list. Some hosts have automated systems for requesting new newsgroups similar to the AREAFIX in FidoNet. My host doesn't have this and to add a new newsgroup I have to send an E-mail message and request that my host add them for me. You will need to check with your host on how to request newsgroups. Wildcat! Conference -> The conference number of the corresponding Wildcat! conference that you defined in MakeWild. Refer to MAMEWILD.TXT for information on configuring the newsgroup conferences. Distribution -> This is usually "World" which means any newsgroup message sent from your system will be echoed around the world. You may also specify limited areas here, but for now you should leave this at "World". Group Type -> This will be "Normal" in most cases. Later on you may wish to add other kinds such as mailing lists or moderated newsgroups. You can find a list of moderated groups in "NEWSGRPS.TXT" which you can get from your host. Mailing List Name -> You shouldn't need to mess with this yet so just leave it blank. Reply to Address -> address to send mail if the group you are defining is a mailing list or a moderated newsgroup. You should leave this blank for your normal newsgroups. Press [F10] to save this and move on. --------- Now hit [F3] to add a host definition and then [INSERT] to add you host. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ MakeGate Copyright (C) 1993,94 Mustang Software, Inc. Version 4.01 ³ ÀÄÄÄÄÄÄÄÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ UUCP Host List ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»ÄÄÄÄÄÄÄÙ º ERI Provider ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ UUCP Host Editor ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Host name : ERI º º Host Administrator : º º Attach limit : 1000000 º º Host domain name : erinet.com º º Host site name : erinet º º Delete files : Y º º Feed type : Provider º º Send non-local mail: Y º º Allow News Requests: N º º Spool directory : C:\WILDCAT\GATEWAY\ERI\ º º Satellite directory: º º Work directory : C:\WILDCAT\GATEWAY\UUCPWORK\ º º Response directory : º ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶ º F2 Pick F4 Newsgroups F5 Aliases F6 Responses F9 Translate F10 Done º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ º INS Add DEL Delete F10 Done º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Host Name -> The name that will be used by wcGate from now on to identify this host. This must be no longer than the length of a legal DOS file name (no more than 8 characters). Attach Limit -> This is the maximum file size in KiloBytes for outgoing file attaches. wcGate uses a utility known as UUENCODE to encode file attaches and place the file information in the body of the message. wcGate will only UUENCODE messages that are equal to or smaller than this file size. There is no limit for the size of incoming file attaches. Host Domain Name -> The fully qualified domain name of your host system. Your host will tell you this when you sign up for service. Host Site Name -> The "Machine Name" of your host. This is usually the first part of your host's domain name. Again, you will have to ask your host for exactly what this is. Delete Files -> This controls whether wcGate deletes incoming mail packets after it has finished processing them. You will keep this as Yes unless you plan on further processing the mail packets after wcGate has finished unpacking and tossing the mail. Feed Type -> Keep this as provider for now since they are sending you the mail. You will only need to set this as Downlink Node if you are acting as a host for another BBS. Send Non-Local Mail -> Set this to yes for your provider. Allow News Requests -> Leave this as No for now. Spool Directory -> This is where wcGate will look for incoming mail to process from UUCICO. The last directory in the path should be the same as the name you entered in HostName. This is VERY important! Satellite Directory -> Directory for wcGate to look for mail packets received from a satellite service such as Planet Connect. Work Directory -> Temporary directory wcGate will make when it is decompressing mail files. This is usually \WILDCAT\GATEWAY\UUCPWORK. Response Directory -> Just leave this blank for now. -------------- Now press [F4] to edit the newsgroups that will be activated for this node. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ MakeGate Copyright (C) 1993,94 Mustang Software, Inc. Version 4.01 ³ ÀÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Select USENET NewsGroups ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͻ٠º Sel Conf Newsgroup º º ÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º () 101 Internet Wildcat ALT.BBS.WILDCAT º () 103 Internet Animation REC.ARTS.ANIME º () 102 Internet BBS & Internet ALT.BBS.INTERNET º () 104 Internet Animation Story REC.ARTS.ANIME.STORI º () 105 Internet Ohio News OH.NEWS º () 106 Internet Cinci Bengals ALT.SPORTS.FOOTBALL. º () 107 Internet MS Windows Apps COMP.OS.MS-WINDOWS.A º () 108 Internet MS Windows Utils COMP.OS.MS-WINDOWS.A º () 109 Internet Science BME SCI.ENGR.BIOMED º () 110 Internet Startrek Fandom REC.ARTS.STARTREK.FA º () 111 Internet MST 3000 REC.ARTS.TV.MST3K º () 112 Internet Star Trek Curr REC.ARTS.STARTREK.CU º () 113 Internet Football REC.SPORT.FOOTBALL.P º () 114 Internet Baseball REC.SPORT.BASEBALL º () 115 Internet Basketball REC.SPORT.BASKETBALL ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶ º Select All Clear All F4 Find F5 Next F10 Done º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ This screen will show all of the newsgroups that you have defined. You will have to select each newsgroup that you will be receiving from the current host you are working on. If you only have one host you should select all the newsgroups. Remember whenever you add a new newsgroup you must come back here and turn it on for your host. Pressing [F9] from the host edit screen will allow you to translate names as they come in and out of your system. With translate you can let any user in the Wildcat! database have any name for their address. You should set up incoming translations for you for Root, Postmaster and SysOp. You might also want translations for other things like support and membership issues. This way someone can address a message to support@jamesbbs.com and you will receive the message within Wildcat!. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ MakeGate Copyright (C) 1993,94 Mustang Software, Inc. Version 4.01 ³ ÀÄÄÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Translation Tables ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»ÄÄÄÄÄÙ º Wildcat Name Action Translation º Éͺ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺÍÍ» º º JAMES MAROUS <== SYSOP º º º JAMES MAROUS <== POSTMASTER º º º JAMES MAROUS <==> JAMES º º º º º º º º º º º º º º º º º º º º º º º º º º º º º º º Çĺ ÄĶ º ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶ º Èͺ INS Add DEL Delete F10 Done ºÍͼ ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Press [INSERT] to add a new translation. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ MakeGate Copyright (C) 1993,94 Mustang Software, Inc. Version 4.01 ³ ÀÄÄÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Translation Tables ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»ÄÄÄÄÄÙ º Wildcat Name Action Translation º Éͺ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺÍÍ» º º JAMES MAROUS <== SYSOP º º º JAMES MAROUS <== POSTMASTER º º º JAMES MAROUS <==> JAMES º º º º º º ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Edit Translation Name ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º º Wildcat Name : JAMES MAROUS º º º º º External Name: SYSOP º º º º º Action : Translate Import º º º º ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶ º º º º F2 Pick F10 Done º º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ º º º º º º º Çĺ ÄĶ º ÇÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĶ º Èͺ INS Add DEL Delete F10 Done ºÍͼ ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Wildcat Name -> The user's name as it appears in the Wildcat! users database. External Name -> The name that will be used on the Internet. More on that in a second. Action -> You can choose to translate the names that are incoming, outgoing or both. Outgoing translations will change the user's name from as it appears in the Wildcat! database to whatever name you specified. In the above example James Marous in the database would become james when the messages are exported. The domain name (@jamesbbs.com) is added automatically. Incoming translations work just the opposite. Names that match the translation name are changed to the user's name as it appears in the Wildcat! database. In my example, james@jamesbbs.com would be translated to James Marous when the message is tossed. Translating both does both of these things. Press [F10] three times to save everything and exit wcGate. Now you are ready to go on to UUCICO.TXT and get ready to pick up your mail.